BONOSS 18mm Hub Centric Wheel Spacers for Tesla Model 3 Performance 2020 2021

BONOSS 18mm Hub Centric Wheel Spacers for Tesla Model 3 Performance 2020 2021

item image

Price: 189.98 USD

Tesla Part Info:

BONOSS 18mm Hub Centric Wheel Spacers for Tesla Model 3 Performance 2020 2021





2Pcs(1 Pair)

Spacer Material

Forged Aluminum 7075T6

Vehicle Bolt Pattern/PCD

5×114.3 / 5×4.5″ 

Stud Material

SCM440 Alloy Steel

Wheel Bolt Pattern/PCD

5×114.3 / 5×4.5″

Stud Grade

ISO Grade 12.9

Wheel Spacer Thickness

18mm / .7″ inch

Lug Nut(Cone Seat)

40Cr Alloy ISO Grade 10

Spacer Center Bore/CB




Stud/Lug Nut Thread

M14x1.5 / 14m*1.5

Lug Nut Head HEX



Reports of TUV/SGS

Torque Specs

140NM(103.5 Ft-tb)

  • Global Pioneer Active Cooling Technique, Safer
  • Forged AL7075-T6 with Tensile Strength ≥ 572 Mpa, Safer
  • ISO Grade 10 Nuts with BONOSS Engraved, Strength ≥ 1110 Mpa, Safer
  • ISO Grade 12.9 Studs with BONOSS Engraved, Strength ≥ 1220 Mpa, Safer
  • Customized Only in 1-3 Days, OEM/ODM Available, More Professional
  • Over 66 Test Reports by SGS TÜV Certificated, More Professional
  • Worry-free 10 Years Warranty, Friendly Customer Service

Important Note: Please confirm these points before buying.

This part is compatible with 
the 2018+ Tesla Model 3 RWD AWD Standard Range(SR)/Standard Range Plus(SR+)/Mid Range(MR)/Long Range(LR) and Performance version. To confirm that this part fits your vehicle, please attached your car,
make, and year.

For a better shopping experience, it is important to measure the
fender gap and confirm thickness before purchasing. Our friendly
customer service will help you to solve any question.

BONOSS Wheel Spacers How to Measure Wheel Spacers for My Vehicle Wheel Spacers Fitment

3. If the thickness of the wheel spacer is smaller than the length of the original studs, the rims used must allow for small hockets
in the mounting surface of the rim. If using rims without enough
hockets, the stock studs should be shortened so that they do not extend
beyond the thickness of the spacer.

FAQ & Tips

1. Are these wheel spacers applicable to Tesla Model 3 Performance version?

Yes, these wheel spacers also fit the Tesla Model 3 Performance version. According to current experience, the original Tesla Model 3 Performance hub axle head has an extra center lip, please feel free to buy it, BONOSS has designed all the Tesla Model 3(including Model 3 SR/Model 3 SR+/Model 3 MR/Model 3 LR) wheel spacers to accommodate this extra lip. In addition, the performance version has a small protruding screw on the original hub axle rotor. If you are installing 15mm Tesla Model 3 Performance wheel spacer, you need to remove this screw. The screw is only there to hold the rotor on during assembly. After the brake calipers are installed the screw has no function. If your car is a
2020+ Model 3 performance with factory wheels, you may need to shorten the factory studs a bit when you install the 15mm wheel spacers, because the original wheel back doesn’t have deep enough cavities to accommodate the protruding factory studs. Please don’t hesitate to contact us for more details if needed.

2. Are BONOSS Tesla wheel spacers safe?

wheel spacers are just the automobile accessories installed between
the assembly hub and wheel, the wheel lugs apply a clamping force to
secure the spacer and wheel to the vehicle hub. Just like wheels,
tires, and brake systems, as long as you use high-quality wheel spacers
and install them properly, they are safe. BONOSS is always concerned
about safety. Take the 5×114.3 wheel spacers as an example, we use
forged AL6061-T6 material (tensile strength ≥310Mpa), modern CNC
machining by 0.02mm tolerance, the multi-stage hub centric design fits
the wheel hub better. Meanwhile, the matching wheel studs adhere to ISO
standard grade 12.9, and ISO standard grade 10 lug nuts, all of our
products have got more than 50 SGS TUV authoritative test reports.
Compared with those cheap casting wheel spacers, BONOSS forged active
cooling wheel spacers are safer, higher performance, and more
professional in design. We believe more professional production offers
more value for customers.

do I need hub centric wheel spacers? What’s the difference between
BONOSS multi-stage hub centric wheel spacers and others hub centric?

wheel spacers offer a better system of support and stability. They are
designed to make a snug connection between the wheel and vehicle hub,
reducing the high-speed vibration and ensuring safer driving. Compared
with an ordinary hub centric. BONOSS uses the multi-stage hub centric
design, which means that multi-stage hub-centric can make the spacers
more closely fitted to the wheel hub, greatly reduce the vibration of
high-speed caused by the inaccurate hub centric. Besides, they can also
be used to change the center diameter of your car, making it possible
to install wheels with different center diameters to your vehicle
properly, transforming lug centric wheels into hub centric wheels.

What is the performance of the bolts and nuts used with BONOSS active
cooling wheel spacer? Why is there a BONOSS engraved on it?

wheel studs of the wheel spacers produced by BONOSS are made of JIS
SCM440 steel. Wheel lug studs made of forged SCM440 alloy steel have
many outstanding characteristics, such as high-strength, wear
resistance, excellent toughness, and impact resistance. It also has the
advantages of good ductility and high-temperature stress resistance,
structural stability, fewer harmful elements, and fewer surface defects.
It has reached ISO standard grade 12.9, tensile strength ≥1,220Mpa,
ultimate tensile load ≥152,000N, hardness (HV) ≥395, NSS≥500H…The
matching nut is made of 40Cr material, after high-strength forging, in
line with ISO international standards Grade 10, proved that the load is
≥1110Mpa, the hardness (HV) is ≥349…they are enough to cope with the
fierce racing competition. For normal driving, they can easily withstand
thousands of strong shocks. BONOSS insists on producing professional
forged wheel spacers and provides wheel spacer far higher than the
industry’s safety and professional standards.

5. How does the “active cooling” function works on my wheel spacers?

a professional wheel spacers manufacturer, BONOSS has created the
world’s first “active cooling” technology based on years of experience,
breaking the long-term single function of the wheel spacers. Through
the rotation of the wheel spacers, the external cold airflow takes away
the internal heat through the active cooling grooves, so as to achieve
the purpose of active cooling, improve the braking efficiency and
reduce the risk of driving safety. Installing BONOSS forged active
cooling wheel spacers can improve braking efficiency, maintain the
brakes at normal temperature, and ensure your driving safety. The
production cost of BONOSS “active cooling” technology is almost the
same as that of traditionally designed wheel spacers. You don’t need to
pay extra, that’s why we say that BONOSS forged active cooling wheel
spacers are particularly price-friendly. BONOSS wheel spacers provide
more additional functions, higher safety, higher performance, more
professional design, and better installation experience.

What are the benefits of the knurling design on my wheel spacers?

knurling design can enhance the aesthetics of the wheel spacers by
introducing an attractive pattern to the side surface. In addition to
aesthetics, there are practical features. Knurling patterns can enlarge
the side area so that it can contact more air, boost the heat
dissipation effect, and reduce the internal stress caused by machining.
That means improving the performance, strength, and durability of the
wheel spacers. BONOSS aims to provide wheel spacers with more
additional functions, safer, higher performance, more professional
design, and better installing experience, that is why we insist on
independent manufacturing and continuous optimization of the design.

How thick wheel spacers do I need?

is a simple method: use a straight edge such as a metal ruler, place
the straight edge on the outermost part of the rims where the wheel
comes closest to the fender (preferably the top), then, measure from
the outside wheel to the straight edge. This distance is the size
spacer you will need to achieve the look that flushes or nearly flushes
with the fender line.

8. Can I customize the wheel spacer with different thicknesses and data? How soon can it be customized?

has an independent design customization department and customized
production line, so custom-sized wheel spacers can be completed within
3-10 days as soon as possible. Provide OEM/ODM. Commonly used 1-inch
wheel spacers stocks are sufficient, if you need wheel spacers with
irregular thickness or torque, to install wheels with different data.
BONOSS customized wheel spacer will be your best choice. BONOSS provides
customized services of unconventional thickness, the thinnest thickness
is 0.1 inches (3 mm), the thickest thickness is 6.4 inches (160 mm).

9.Why BONOSS choose SGS and TUV to test the quality of the product?

and TÜV Rheinland as the world’s famous testing service companies,
standing for safety and quality. To earn customers’ trust, which is also
our confidence in product quality. BONOSS has fully passed over 66 ISO
standard SGS, TÜV authoritative tests, and all achieved excellent
scores.BONOSS forged grade 12.9 extended wheel bolts have passed the SGS
2,000,000 times limited life range test without damage, tensile
strength≥1,282Mpa, ultimate tensile load≥152,000N, hardness (HV)≥395,
NSS≥500H… By these authoritative test reports, BONOSS truly achieves the
quality and professionalism expressed in the form of data and truly
guarantees safety. We believe high standard quality management, together
with authoritative certification reports is the best way to meet
customer and regulatory requirements. If you need more details reports, please feel free to contact us.


1.Remove original wheel bolts and wheel.
2.Put BONOSS Wheel Spacer on hub of car (where hold the wheel) Please ensure that the spacer is fully seated and flush with the hub.
3.Put wheel onto the spacer and match the wheel & spacer bolt holes and mounting hole.
4.Insert new longer BONOSS wheel bolts. Carefully hand turn bolts making sure that they spin in easily and fit well.
5.Repeat above step with the bolts left.
6.Use hand wrench to tighten extended bolts in a star pattern.
7.Spin the wheel and tire to check whether it cause any noise or interference or not before fully tightening bolts.
8.Use torque wrench set with wheel manufacturers’ specifications to tighten the longer bolts in a star pattern
–We are not responsible for custom duty or import tax.
–All Orders that Payment is received before 5pm Beijing Time M-F will be shipped the same day, if received after that time, they will be shipped the next business day, Saturday and Sunday orders will be processed and Shipped on Monday.
All orders are shipped by DHL/FedEx/UPS within the continental United States. Other international Shipping is available. You need to contact us confirming express method and accounting shipping costs.
–Your purchase will be shipped via standard airmail, which normally takes 3-10 working days to arrive.
–We will provide you with tracking numbers when the item is shipped out.
14 days money back, buyer pays return shipping.
More and more customers believe in BLOXSPORT’s profession, so choose us.

BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic…), wheel spacers(3mm-120mm, 1″ inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug… We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed the 1 Million times Fatigue Test,etc.).

We always insist on four concept respectively:

1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product’s stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer’s hand (not only the best quality but also there’s no scratch on our products which has been sent to our customers).

Copyright © 2021 BLOXSPORTS. All Rights Reserved.

Leave a Reply

Your email address will not be published.